Diaphragm accumulators are a cost effective option for numerous functions involving energy storage, shock absorption or pulsation dampening in a hydraulic or fluid system. They are well suited for applications where smaller fluid volumes and flow rates are adequate and that require or involve:

  • Compact design
  • Low weight
  • Flexible mounting positions
  • Extremely quick shock response
  • Low cost
  • Low lubricity fluids, like water
此图片的alt属性为空;文件名为Diaphragm-Accumulators-5.png

Specifications

TypeDiaphragm Accumulator
Model Code DescriptionSBO250-0.075E1/663S-250CK
Fluid Port ConnectionStandard SAE Connection
Weight0.7 kg1.5 lb
Size (L)0.075
MaterialLow Temp Carbon Steel
SeriesSBO250
Manufacturing ProcessWelded
Connection Size9/16-18 UNF Female
RepairableNo
RechargeableYes
Country of InstallationUSA/ASME
Diaphragm CompoundECO (Hydrin)
Compound Operating Temperature Range (Mineral Oils)-40 to 250 ºF
Shell Construction and Gas Port DesignWelded Construction, rechargeable, ZP Gas Valve Version 1 (M 28 x 1.5)
ShellLow temperature carbon steel (≤ -20 ºF)
Fluid PortLow temperature carbon steel (≤ -20 ºF)
Thread (Society of Automotive Engineers (SAE) – Female)1 1/16 -12 UNF
Flow10 gpm38 L/min
Maximum Pressure Ratio (p2:p0)8:1
Volume Capacity0.020 gal0.075 L
MAWP3600 psi250 bar
Effective Gas Volume5 in³
Division19
BUnEA

Dimensions

Diameter2.52 in64 mm
Height4.48 in114 mm
Dimension Q10 gpm
Dimension A2.68 in68.0 mm
Hex Size1.18 in30 mm

Construction

Both types of diaphragm accumulators have the same basic construction. The difference is in the shell. The welded version has a shell that is electron-beam welded, and therefore cannot be repaired. The threaded type has a shell made up of two halves (top and bottom) which are held together by a threaded locking ring.

Corrosion Protection

For use with certain aggressive or corrosive fluids, or in a corrosive environment, ZP offers protective coatings and corrosive resistant materials (i.e. stainless steel) for the parts that interface with the fluid or are exposed to the hostile environment.

Mounting Position

Diaphragm accumulators are designed to mount in any position. In systems where contamination is a problem, we recommend a vertical mount with the fluid port oriented downward.

System Mounting

ZP diaphragm accumulators are designed to be screwed directly onto the system. We also recommend the use of our mounting components, to minimize the risk of failure due to system vibrations.

Application

Some common applications of diaphragm accumulators are:Agricultural Machinery & EquipmentForestry EquipmentMachine ToolsMining Machinery & EquipmentMobile & Construction EquipmentOff-Road Equipment

Diaphragm Materials

Not all fluids are compatible with every elastomer at all temperatures, therefore, ZP offers the following materials:NBR (Standard Nitrile)LT-NBR (Low Temperature Nitrile)ECO 30 (Epichlorohydrin)IIR (Butyl)FP

Additional Information

Diaphragm Accumulators have been successfully applied in both industrial and mobile applications for energy storage, maintaining pressure, leakage compensation, and vehicle hydraulic systems.

ZP manufactures two types of diaphragm accumulators:Non-repairable (welded)Repairable (threaded)

If you work with gas cylinder or information about our company. You can communicate with us on the website. Our official website is www.zpcylinder.com. Our cost-effective products are very popular.

Leave a Reply

Phone +86-18622042946

Skype 18622042946

WhatsApp +8618622042946

QQ 2039738293

Back to top Back to top

Leave a message