Working principle of accumulator capsule

Absorb impact hydraulic energy

The accumulator capsule divides the accumulator into two chambers: gas and liquid. Fill the capsule with nitrogen. There is nitrogen in the capsule, and the chamber includes the capsule and shell. After being added to the outlet of the check valve. The gas volume in the capsule decreases with the increase of pressure. So as to absorb the impact hydraulic energy and reduce or eliminate the pressure impact of the system.

Reduce pressure shock

In order to reduce or eliminate the pressure impact of the system. The general practice is to install a bladder accumulator near the pressure impact point for pressure buffering. However, due to the charging and discharging effect of the bladder accumulator. It is easy to oscillate repeatedly after absorbing the pressure. The solution is to add a one-way throttle valve on the access pipe section of the bladder accumulator. So that when the bladder accumulator absorbs the pressure impact, the hydraulic oil can smoothly enter the accumulator capsule. And when the hydraulic oil in the capsule returns, it will be controlled by throttling damping to eliminate oscillation.

Adjust throttle valve opening

Add a one-way throttle valve on the access pipe section of the bladder accumulator. By properly adjusting the opening of the one-way throttle valve. The hydraulic oil can smoothly enter the accumulator capsule when the bladder accumulator absorbs the pressure impact. When the hydraulic oil in the leather bag returns, Control of throttle damping. With the increase of liquid resistance, the pressure decreases and the number of oscillations decreases. The minimum outlet pressure of the check valve is 8  6Mpa, max. 10  8Mpa, and the peak value of impact decreases to about 60% of that of non bladder accumulator.

If you work with gas cylinder or information about our company. You can communicate with us on the website. Our official website is www.zpcylinder.com. Our cost-effective products are very popular.